Phone Adhesive Pads

This custom cut adhesive film secures the battery to the frame of the Samsung Galaxy S20 FE smartphone.

Replace the adhesive foam gasket that fits between the loudspeaker and the speaker opening in the rear case compatible with iPhone X. This gasket helps seal liquid and dust out of the device.

This custom cut adhesive film secures the rear panel assembly to the case of an iPhone 16 Pro.

Replace the custom-cut adhesive film that secures the battery to the frame compatible with Samsung Galaxy S20 Plus smartphones.

Replace the custom-cut adhesive film that secures the battery to the frame compatible with Samsung Galaxy Note20 Ultra and Note20 Ultra 5G model smartphones.

This custom cut adhesive film secures the rear panel assembly to the case of an iPhone 16 Pro Max.

Replace the custom-cut adhesive film that secures the battery to the frame compatible with Samsung Galaxy S20 Ultra model SM-G988B smartphones.

Replace the adhesive foam gasket that fits between the loudspeaker and the speaker opening in the rear case compatible with iPhone XS. This gasket helps seal liquid and dust out of the device.

Replace the thermal conductive pad on the logic board of your Google Pixel 8 smartphone.

Replace the adhesive foam gasket that fits between the lightning port socket and the center opening in the rear case compatible with the iPhone X.

This custom cut adhesive film secures the rear panel assembly to the case of an iPhone 16.

Replace the adhesive backed foam gasket spacer on the loudspeaker connector in an iPhone X. Set of 5 pads.

Replace the thermal conductive pad on the logic board of your Google Pixel 8 Pro smartphone.

Replace an adhesive backed foam gasket for the lightning port compatible with the iPhone 7.

Replace the adhesive backed foam spacer on the back of the battery cable connector in an iPhone 6s. Set of 5 pads.

Replace the adhesive gasket ring on the lens end of the front-facing camera of an iPhone 5, 5s, 5c, SE (1st Gen), 6, 6 Plus, 6s, or 6s Plus. Set of 5 gaskets.

This custom cut adhesive film secures the rear panel assembly to the case of an iPhone 16 Plus.

Replace the custom-cut adhesive film that secures the battery to the frame compatible with Samsung Galaxy S20 smartphones.

Replace the adhesive backed foam spacer adhered to the lower end EMI grounding bracket that presses on the vibration motor connector in an iPhone X. Set of five foam pads.

Replace the adhesive backed foam spacer for the front-facing cameras in an iPhone X. Set of five foam pads.

Replace the adhesive backed foam spacer on the rear-facing main camera assembly compatible with the iPhone X.

Replace the one large and three small adhesive backed foam spacer pads on the main part of the logic board connector bracket in an iPhone X. Set of 4 pads.

Replace the two adhesive backed black conductive foam spacers at the top of the rear case of an iPhone X. 5 pairs of pads.

Replace the adhesive backed foam spacer on the microphone that is part of the lightning connector assembly compatible with the iPhone X. Includes a set of 5 pads.