Introduction
If you need to replace a component inside the tablet, you will need to remove the back panel. This guide will teach you how to remove the back panel.
What you need
-
-
With the tablet face down, pull out the SD card slot cover.
-
Using a Philips #000 screwdriver, remove the 3mm screw in the SD card slot.
-
-
-
-
Insert a plastic opening tool in the small crevasse between the screen and the back.
-
Pry the screen away from the back panel.
-
Repeat this on each edge of the device.
-
-
-
After using the plastic opening tools, pry open the device with your hands, removing the back panel from the screen.
-