Skip to main content

Model A1019 / 10 or 20 GB hard drive / full-size Firewire port

29 Questions View all
Question Closed

I need a way to hook it to my computer a cable

I need a way to hook it to my computer a cable

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

2 Answers

Most Helpful Answer

you need a firewire cable, and a computer with a firewire port. More specificlly, you need a 6-Pin Male to 6-Pin Male FireWire 400 cable. Most macs made from 2000 to 2006 have at least one firewire 400 port, if you have a PC, you will need a firewire port, a firewire expansion card, or an adapter such as this: http://cgi.ebay.com/USB-Male-to-6-Pin-Fi...

Was this answer helpful?

Score 1

1 Comment:

Oh right, this one was just a regular FW 400 port, those are available practically everywhere

by

Add a comment

Unfortunately iFixit does not carry this cable, however you can find a lot from various other vendors

Was this answer helpful?

Score 0

5 Comments:

So actually you just need any generic 6 pin to 6pin FW 400 cable

by

and a place to plug it in, most pc's even my PC I built 1-2 years ago doesn't have a firewire 400 port

by

And here's a link to one you can get from apple.

by

If it's a PC that can be a problem, but a lot of Dells include and have included FW ports, in which case I believe there are all sorts of FW->USB adapters etc.

by

There are also a lot of PCI firewire expansion cards out there, but almost every G3, G4, and G5 mac has at least one firewire 400 port, and almost all intel macs have a firewire 800 port, or a 400 port (Except the MacBook).

by

Add a comment
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 938