Rep: 13
1
1
Hi all,
The lid of my Thermos doesn't work as it should, it has a button to control the flow of liquid and it doesn't work. So I decided to open it up and figure out what's wrong inside. There is no screw, I tried using a knife to open the cap but it didn't helped.
Here is the photo:
http://www.img4up.com/up2/96921903968885...
How to open it? Thanks for any help.
Is this a good question?
Rep: 685.2k
3.4k
1.1k
2.6k
To operate the twist and pour stopper on beverage bottles:
Twist the stopper clockwise to seal.
Twist the stopper counterclockwise 1/2 -1 turn so that the pour indicator is pointing down. Pour beverage. Note: The stopper does not need to be removed to pour liquid. Twist the stopper clockwise to reseal.
Twist the stopper counterclockwise to remove.
To operate the 360° drinkable lid on tumbler models:
Twist drink lid clockwise to seal.
Twist drink lid counterclockwise 1/2 - 1 turn to the drink position. Liquid can now be dispensed from any direction. Twist the drink lid clockwise to reseal.
Twist drink lid counterclockwise to remove.
To operate the push button sipper lid on the hydration bottle:
Rotate the stainless steel locking ring down.
Push the button on the sipper lid to open the top. Drink or pour beverage.
To close, push the top down until it snaps in place.
To secure the top, rotate the stainless steel locking ring up until it snaps in place.
Was this answer helpful?
Fast question please, I lost my cap on a trip, is there antwhere to buy a new one please?
Hawk Not so fast. Please give us your make and model number ;-) BYW great name, it's also my grandsons name.
Upside down d lid inside hot boiling water for a while. It can b easily open using this way
Was this answer helpful?
Past 24 Hours: 3
Past 7 Days: 17
Past 30 Days: 81
All Time: 22,020
