Rep: 1
2
1
I replaced a broken hard drive and now the computer wont turn on at all. When I plug in the magsafe a green light comes on and the battery is fully charged but when I hit the power button nothing happens. Please help.
Is this a good question?
Rep: 685.3k
3.4k
1.1k
2.6k
You seem to have located the problem, it's not getting a start signal from the power button on the upper case. An easy test for a professional with a spare upper case becomes a costly one for you if you don't have one. See if you can find find a local repair guy that will test it out for you on the cheap.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 674
1 Comment
so i can turn the computer on by shorting out the pins. so i replaced the upper case cable and still the power button wont work. is there anything else i could check or change or do i have to replace the upper case now?
by ogbta