Fix Your Stuff Community Store

There are many versions of these Saeco coffee machines. They are very similar in structure and many repairs are similar.

9 Questions View all

Options

After switch on: priming star for few seconds then E05 error

Dear,

Circuit priming message loops at beginning, then straigth away E05 error and asking to restart the machine, I did few times without sucess.

I opened the machine, and I can`t see any leak.

Any recommendation please?

My  coffee machine is Royal gran crema

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 0
1 Comment

Hi . The problem with E05 is generated of many SAECO coffee machine , I had this problem and I fixed it . See the video below and I am sure it will helps you .

https://youtu.be/0YR-xtacx1U

by

Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

Error code 05 means that the flow meter does not give a signal. Now you have to search: is the flowmeter blocked or broken? Or the water cannot pass through, e.g. because the heater or the pump is calcified. In Saeco Royal Pump Replacement the flowmeter can be seen in step 6, picture 2. Open the flowmeter and clean it, it's easy.

Was this answer helpful?

Yes No
Score 1
Add a comment

Add your answer

anass will be eternally grateful.
View Statistics:

Past 24 Hours: 5

Past 7 Days: 33

Past 30 Days: 216

All Time: 7,064