Skip to main content

Model A1418 / Late 2012 / 2.7 & 2.9 GHz Core i5 or 3.1 GHz Core i7 Processor

212 Questions View all

Replaced, ram, hard drive and pram battery, now screen will not turnon

IMac turns on, get the charm sound but screen does not turn on, had a look at the motherboard all 4 leds are on. Also did a pram reset. Any ideas please.

Answer this question I have this problem too

Is this a good question?

Score 0
2 Comments

Does an external monitor work?

Use a bright flashlight resting on the display at a sharp angle do you see a faint image of your desktop and its Icons?

by

Hi Dan, yes with a flashlight, I can see the screen.

by

Add a comment

1 Answer

Most Helpful Answer

That focus us to the backlight logic on your logic board or the displays power cable and connection.

Review Step 19 here iMac Intel 21.5" EMC 2544 Display Replacement to check the cables connection. If that is good and the cable is as well thant points to the logic board, review Step 23 in iMac Intel 21.5" EMC 2544 Teardown the Green Intersil ISL6364 multi-phase pulse width modulation (PWM) controller chip and its support logic. That will take some deeper skills and tools to fix or you’ll need a new logic board.

iMac Intel 21.5" EMC 2544 Image

Guide

iMac Intel 21.5" EMC 2544 Teardown

Difficulty:

Moderate

iMac Intel 21.5" EMC 2544 Display Image

Guide

iMac Intel 21.5" EMC 2544 Display Replacement

Difficulty:

Moderate

1 - 2 hours

Was this answer helpful?

Score 1

1 Comment:

Thank you for your help

by

Add a comment

Add your answer

Craig Madden will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 3

All Time: 57