Fourth generation iPhone. Repair is straightforward, but the front glass and LCD must be replaced as a unit. GSM / 8, 16, or 32 GB capacity / Model A1332 / Black and White.

3185 Questions View all

A unknown part inside iPhone 4

Hi there.

I have takedown iPhone 4 and there is a unknown part found.

It looks connection part for Wifi or GPS which are functions really weak after takedown.

Block Image

Block Image

Dose anyone know which part and how to fix it?

Thanks

Answered! View the answer I have this problem too

Is this a good question?

Score 0

Comments:

Both image links are bad. See the Blue and white "Images" box in the lower left hand corner? Click on that and upload your images directly.

by

Thanks mayer.

by

Add a comment

2 Answers

Chosen Solution

There are some very good answers to your question on this iFixit Answer Area, from last month. That little piece is part of the Cover Plate at the top of the iP4 (the plate that covers the Logic Board Connectors). It is located at the top center of the Plate, and the Long Screw at the top of the iP4 goes right through it.

Wifi very weak after display replacement

http://s1215.photobucket.com/albums/cc51...

Was this answer helpful?

Score 1

Comments:

Thank you so much Brad!

by

Add a comment

yeah, i know what it is. You know when you open your back cover and you see the black metal plate covering all 5 connectors? The plate is held by 5 screws and under the top screw (the longest one) is where your metal part is (its responsible for wi-fi connection).

Was this answer helpful?

Score 0
Add a comment

Add your answer

johnny s will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 1,499