Skip to main content

Mid 2012 model, A1278 / 2.5 GHz i5 or 2.9 GHz i7 processor.

1624 Questions View all

Bought used, questions about fixing a dent

One of the areas on the left is dented, I was wondering if and how I can get it fixed. I can’t take any photos right now, but these two from Google are exactly what mine looks like, exact spot too;

Block Image

Block Image

Should I buy a new top case? Where are the best sites/stores to buy from?

Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

2 Answers

Most Helpful Answer

We use a small block of ebony wood and a jewelers hammer to take out this particular damage. Works very well.

Was this answer helpful?

Score 3

2 Comments:

Should the OP remove all of the internals before doing this? That method you suggested seems practical but destructive if not done properly...

by

Sure, you pull the internals. I've seen this exact bend many times and repaired it just as often. It's a weak point.

by

Add a comment

A new upper case would do the trick. However, a new upper case will cost you $118 (without tax and shipping costs). I am unsure of how to safely remove that warp without damaging the case further. Hopefully someone else will chime in and suggest a way to safely remove that warp.

MacBook Pro 13" Unibody (Early 2011-Mid 2012) Upper Case

MacBook Pro 13" Unibody Mid 2012 Upper Case Replacement

MacBook Pro 13" Unibody (Early 2011-Mid 2012) Upper Case Image

Product

MacBook Pro 13" Unibody (Early 2011-Mid 2012) Upper Case

$39.99

Was this answer helpful?

Score 0
Add a comment

Add your answer

cameron miller will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 70