Skip to main content

The NutriBullet by the makers of Magic Bullet is a personal blender that is self-contained and simple to use. It includes an electric blender base with a number of attachments for the user and offers a healthy alternative to blending food by breaking down ingredients in their most nutritious states.

65 Questions View all

The top base gear is sticking to its base and cease to rotate.

When plugged in the nutribullet does not rotate. I opened it fully thinking the motor winding would have burnt but to my surprise the Base Gear is sticking to its base cup. I tried to remove it but it is so firm it is not coming out. Tried bit of heating the whole thing but it does not. Any clue

Answer this question I have this problem too

Is this a good question?

Score 0
1 Comment

Hi thanks for looking into it.

I removed every single screw and now the motor is completely out along with the actuators. I am now holding the cup that has the top gear and this gear is sticking to the bottom of the cup as if it has been glued to it.

I tried heating them a bit but it is so well sticking that it is not coming out. Probably during rotation it has melted a bit and stick to the plastic of the cup.

by

Add a comment

1 Answer

Most Helpful Answer

Have you removed the four screws?

Magic Bullet NutriBullet Base Replacement

Was this answer helpful?

Score 1
Add a comment

Add your answer

Rajvikram Singh will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 8

Past 30 Days: 28

All Time: 763