Released on September 19, 2014, this 4.7" screen iPhone is the smaller version of the iPhone 6 Plus.

2919 Questions View all

Camera not sharp after case replacement

I replaced the housing of my iPhone 6, now my back camera isnt focusing anymore.

So I thought I broke the camera, I replaced the camera with a new one but it is still the same issue.

The images are blurred, can anyone help me with this?

Answered! View the answer I have this problem too

Is this a good question?

Score 0

Comments:

I will open my phone tomorrow and let you guys know, thanks!

by

Add a comment

4 Answers

Chosen Solution

I would check out the "lens" in the housing. It may be dirty or have a fingerprint on it. You will need to clean it with either a magic pen or some IPA and a clean q-tip.

Was this answer helpful?

Score 1

Comments:

It is a custom housing and I believe it doesnt have a lens in the housing.

Could that be the problem?

by

If there was no lens, then it wouldn't be blurry unless it was the camera itself that was the issue.

by

Add a comment

Hi,

Custom or non original housings tend to have a low quality plastic lens.

This would need removing and replaced with a glass lens.

Or there may be dirt on the lens itself.

Was this answer helpful?

Score 1

Comments:

Or a foil of protective nylon.

by

Or that also!

by

Add a comment

Cleaning the lens fixed the issue.

Was this answer helpful?

Score 0
Add a comment

If the lens is missing it causes a blurry picture.

Was this answer helpful?

Score 0
Add a comment

Add your answer

Zackito will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 2

All Time: 76