Skip to main content

Repair information and guides for the iPhone 6 that was released on September 19, 2014. Model Numbers: A1549, A1586, and A1589

4994 Questions View all
Question Closed

iPhone 6 Not charging only showing 0.6v on contacts

Hi,

My iPhone 6 was dead so i replaced the charging port and battery, the phone now powers on when i plug in a charger but will not charge.

i am only getting 0.6v when charger plugged in.

Any help is grateful.

Thank you

Answer this question I have this problem too

Is this a good question?

Score 0
1 Comment

Thank you for your reply, i have been using a non apple charger.

I will go ahead and replace the U2 chip then.

by

Add a comment

2 Answers

Most Helpful Answer

I would agree with Ben, as long as you've ruled out bad part on the charge port, then I would think Tristar chip (U2 chip) has been damaged by non-Apple chargers. Solution is to have this chip replaced by microsoldering

Was this answer helpful?

Score 3
Add a comment

Have you been using car chargers by any chance? It's quite possible that the charging IC could have been burnt and needs to be replaced.

Was this answer helpful?

Score 2
Add a comment
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 186