Rep: 1
1
drpped tray, reveals disk drive and on top of that the hard drive. When the tray was dropped as part of the disassemby, a cable dangled identified as tmds no visable place for it to be attached. What to do with it to be terminated any were when reassembling?
Is this a good question?
Rep: 43
2
The TMDS CABLE IS THE Monitor Cable. You wont have any video if this cable is unplugged from the Logic Board.
If the chip that connects the TMDS cable to the Logic Board is still attached to the TMDS Cable, then this means it has broken off of the Logic Board during dis-assembly. You will need to buy a new Logic Board. They range from 15-50 dollars depending on where you purchase.
Good Luck
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 4
Past 30 Days: 5
All Time: 1,871
1 Comment
Can you give a link as to where you got this identification?
by mayer