Rep: 1
1
Stupid issues. i installed a new SSD and when i was putting it all back together with new adhesive strips i noticed i forgot to reinstall the small plastic brackets that hold the drive in place. i did put the rubber parts back in but not the brackets. will this cause any issues?
Is this a good question?
Rep: 116.3k
66
68
359
It could - that's why there are brackets =8^[ since It's an SSD there should be no vibration from it, but fans or other components in the machine may shake it over time until it moves... not a good thing.
If this answer is acceptable please remember to return and mark it.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 1
Past 30 Days: 1
All Time: 92
