Hello
First of all, sorry for my english.
2 weeks ago, i had a problem with my microphone, so i replace it. Just after that, my problems begans. I have very bad reception (GSM). I have changed 2 times cellular antenna but the problems is not resolved. i also cleaned contact with isopropilyc alcohol, but nothing changed.
Does anyone knows where is my problems?
Regards.
Jeff
Is this a good question?
Rep: 73.8k
19
111
82
Check the top screw on the logic board and the contact of the logic board underneath the screw. This is another antenna for cell reception. Usually they don't break at the same time.
Was this answer helpful?
Hello
can you tell me wich screw is concerned exactly with this picture ?
http://www.brico-phone.com/content/produ...
regards
Was this answer helpful?
Rep: 37.6k
22
51
42
First off never heard of the top screw giving bad service in a 4s even with this screw out your service would be grand.. I could b wrong tho
The screw he's talking about is the top orange one
Was this answer helpful?
The top screw press the logic board into the housing, ensuring top antenna connection. Usually the primary antenna is connected next to the battery but this secondary one can solve some issues as well. Especially when the bottom one is broken.
Never knew that good til know :)
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 116
