Model A1225 / Mid 2007 and Early 2008 / 2.4, 2.8, or 3.06 GHz Core 2 Duo processor

431 Questions View all

No Disc Burning Device Found

iMac Intel 24" Early 2008 3.06GHz

Hardware system report says "No Disc Burning device was found"

New DVD Burner fitted (part No : Panasonic UJ-875) still saying "No Disc Burning Device was found"

Any ideas?

Thanks

Regards

John Hutchinson

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

Use this guide and go back through and check your cable connections: iMac Intel 24" EMC 2134 and 2211 Optical Drive Replacement

Was this answer helpful?

Score 2

Comments:

I have had my iMac in pieces again & checked the cable to the DVD (motherboard & DVD ends) both were seated ok.

Is there any test software available to check the interface to the DVD?

The label on the motherboard reads :

by

Mother board label:

W881003CVZUMA K3 MB BEST 3.06G

by

that's actually the serial number for the logic board not the computer. The serial number for the computer is on the bottom of the stand.

by

The reason I gave the motherboard label number was because I want to find some test software to test the the DVD interface on the motherboard.

The numbers on the base of my iMac are:

Serial No: W88121JH0N4

iMac 24"/3.06GHZ/2GB/500GB/SD/AP/BT

IC:4324A-BRCM1022 Model No.:A1225

by

Apple iMac "Core 2 Duo" 3.06 24-Inch (Early 2008) Specs

Identifiers: Early 2008 - MB398LL/A - iMac8,1 - A1225 - 2211

by

Show 4 more comments

Add a comment

Add your answer

John will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 7

All Time: 496