Student-Contributed Wiki

Student-Contributed Wiki

An awesome student from our education program made this wiki. It is not managed by iFixit staff.

Phone will not turn on. ¶ 

When I press the power button nothing happens.

Faulty Battery ¶ 

If the phone will not turn on the most common issue is the battery not being able to charge. Make sure that the phone is set in the base unit all the way and the wall adapter is plugged into the wall. If this does not solve the issue of turning the phone on the battery may need to be replaced.

The battery may need to be replaced, this can be accomplished by using my Uniden Dect 6.0 Battery Replacement guide.

Keypad is not functioning ¶ 

"The keypad will not light up or let me dial out even though I am pressing the numbers."

Damaged or broken keyboard. ¶ 

If the rest of the phone seems to be working well, battery, display, etc the key board may have some possible severed wires or just fizzled out. First be sure that the keyboard doesn't have any dirt between the buttons. If the keyboard looks well cleaned than the keyboard may need to be replaced. Easy replacing can be done here...

No display on main screen ¶ 

" I can't see anything on the main screen"

Bad Display Screen ¶ 

No display may also indicate its time to replace the LED screen! First make sure that the battery is not the issue as to why the main screen is not displaying information.If it is, refer back to the battery replacement guide. If not, then make sure you have your phillips #1 screw driver and tweezers ready! Your going to use them along with the Uniden Dect 6.0 Display Replacement guide.

My phone says searching and has no dial tone.

monkat86 - Reply

My phone is on silent mode how do I take it off

Kenneth Sherby - Reply

My phone is on silent mode how do I turn it back on

Kenneth Sherby - Reply

hi i can not retrieve any voice messages 0nunit.i can by dialing 101.please help

harry walters - Reply

My phone keep blinking connecting and then says welcome please wait. I can't answer.

Gail M. Smith - Reply

It then says searching. Gail M. Smith

Gail M. Smith - Reply

My phone is searching and out of range after replacing battery.

michaeltruong - Reply

I have a voicemail with Videotron. When someone leaves me a message in my voice mailbox, I normally see a blinking appear on my phones. Now I have messages and the blink no longer appears and when I lift the receiver I do not have that beep beep sound as to what I have a message. Can someone help me?

calarouch - Reply

My phone is on silent mode how do I take it off

TWA - Reply

My phones have a dial tone, but when I dial it dials and still has a dial tone

Belinda - Reply

My phone says searching all of the time. No dial tone

Albert Sloan - Reply

My phone keep saying line on hold and a A large. In the on spot

vmaxines - Reply

tele line is clear but when i connecting to tele set, uniden dect4096 two line cordless i get noice like humming in background, what’s issue to this, clearify me. tele line almost silence, i check out with another tele set…

Taviya Abhal - Reply

when i use tele set, uniden dect4096 two line cordless, i get noise like humming, tele line almost very clear, i chech out with another tele set, what is the issue to this, clearify me… earliest please…

Taviya Abhal - Reply

how do I increase the number of rings before going into voicemail

Daniel Murphy - Reply

How do I increase the number of ringings before going into voicemail

Daniel Murphy - Reply

View Statistics:

Past 24 Hours: 16

Past 7 Days: 134

Past 30 Days: 656

All Time: 13,156