Analog Joystick
|
5 Answers 2 Score |
Loss of audio Output From Units speakers. |
|
6 Answers 5 Score |
Why does my PSP GO screen remains blank? |
|
4 Answers 6 Score |
PSP Go - No Power, No Charging |
|
3 Answers 3 Score |
Psp go wont turn on? |
Parts
Tools
These are some common tools used to work on this device. You might not need every tool for every procedure.
Identification and Background
Released early October 2009, the PSP Go introduced a significantly smaller form factor than that of the original PSP.
The biggest change from previous PSP models is that the PSP Go does not have a UMD drive. Instead, it has 16GB of NAND flash memory soldered to the logic board.
The unit is expandable with a Memory Stick Micro (M2) flash card up to 32 GB. Sony claims that the battery is not user replaceable (unlike previous PSP models), but it is actually quite easy to replace the PSP Go's battery.
More information from Wikipedia: "The unit is 43% lighter and 56% smaller than the original PSP-1000, and 16% lighter and 35% smaller than the PSP-3000. It has a 3.8" 480×272 LCD (compared to the larger 4.3" 480×272 pixel LCD on previous PSP models). The screen slides up to reveal the main controls. The overall shape and sliding mechanism are similar to that of Sony's mylo COM-2 internet device."
The most often replaced PSP Go parts include the battery, display, inner case, and screws.
