iPad 2 Front Glass/Digitizer Touch Panel Full Assembly

$44.95

Product code: IF112-002

Click Image To Zoom

 
 
 
 
 
 
 
 
 

iPad 2 Front Glass/Digitizer Touch Panel Full Assembly

$44.95

Product code: IF112-002

Product Overview

All-in-one fix for the iPad 2's front glass panel

  • Replacement part for any shattered iPad 2.
  • This part makes installing a front panel easier with the adhesive, front facing camera bracket, and blank home button already installed.
  • When performing the repair, you may damage the bezel or Wi-Fi and Bluetooth antenna. You may want to buy those parts just in case. If you don't end up using either of them, you can return them.

Assembly components:

These come pre-installed on the front panel

Kit contents:

Compatibility

Identify your iPad

  • All iPad 2s

Product Details

$49.95 Fix Kit / Black

 
 

Condition:

New

Notes:

Includes all the tools needed to do the repair.

  • Looking for your panel? It's safely shipped in the cardboard sleeve beneath the anti-static project tray.
  • This product cannot be shipped to Mexico.
  • Este producto no puede enviarse a México.

$49.95 Fix Kit / White

 
 

Condition:

New

Notes:

Includes all the tools needed to do the repair.

  • Looking for your panel? It's safely shipped in the cardboard sleeve beneath the anti-static project tray.
  • This product cannot be shipped to Mexico.
  • Este producto no puede enviarse a México.

$44.95 Part Only / Black

 
 

Condition:

New

Notes:

This option does not include tools.

Interested in wholesale discounts?

Check out iFixit Pro

$44.95 Part Only / White

 
 

Condition:

New

Notes:

This option does not include tools.

Interested in wholesale discounts?

Check out iFixit Pro

Add to Cart
 

Replacement Guides

iPad 2 CDMA

Difficulty: Difficult

iPad 2 GSM

Difficulty: Difficult

iPad 2 Wi-Fi EMC 2415

Difficulty: Difficult

iPad 2 Wi-Fi EMC 2560

Difficulty: Difficult

 

Compatibility

iPad 2 CDMA
16 GB
32 GB
64 GB
iPad 2 GSM
16 GB
32 GB
64 GB
iPad 2 Wi-Fi EMC 2415
16 GB (EMC 2415)
32 GB
64 GB
iPad 2 Wi-Fi EMC 2560
16 GB (EMC 2560)
 

Stories

Eric's Story Photo #806885
Eric's Story Photo #806888

My Problem

After fixing my sister's iPhone, she pulled a smashed iPad from her closet. It was in a bubbly green foam "protective" frame that had obviously been no match for her toddler son. She had not used it in years and thought my son and I might be able to do something with it. We were eager to put it on the wall in our kitchen, if we could fix it. Off to ifixit we went!

My Fix

The repair was the most painstaking we have ever attempted. We had a lot of glass to clean up, and because it was so shattered, we mostly had to pick it apart rather than lift it off. The iPad was also so severely dented that we had to try straightening the aluminum a bit and then trim off a portion of the bezel to get the new digitizer comfortably seated. Luckily, we knew the pad was destined for life in a case on the wall, so we were comfortable making these changes.

My Advice

Patience. This took careful, slow work removing each bit of the shattered glass. It required special care to prevent damage to the wifi cable and camera. The guide was a huge help to us. The advice to tape up the glass to limit flying pieces was especially helpful. The excellent tweezers included in the tools ifixit supplied with the digitizer fix kit were our primary tool. We used these to pry up and then remove pieces of the glass. We also found a heat gun more useful than the iOpener for softening the adhesive.

My Problem

iPad 2 Digitizer was in pretty worse for wear shape and iPhone 5 battery went from full to empty in a few hours.

My Fix

The hard repair. iPad 2 Digitizer came off in no less than 1 million small glass fragments. With some patients and some careful elbow grease, the digitizer was off. New one on and like new in a few minutes. This is the repair that i thought i might be tossing the iPad in the garbage and getting a new one.

The easy repair. The iPhone 5 has a few screws, pull the screen up, pry the battery out, put in new battery, done. Turned iPhone on to check repair. Nope. Maybe it needs a charge. Nope. Take apart 20 more times. Nothing. I must have been too aggressive pulling up the screen and broke a wire. I could hear the phone working but nothing on the screen. Tossed in the garbage and off to Apple for a new iPhone. Proud owner of a new iPhone 6s.

My Advice

The option to repair these devices yourself is awesome. ifixit gives a great and cheap option to fix your device rather than get a new one. The kit options are perfect. Great advice on this sight also.

My Problem

iPad 2 - shattered glass --not just cracked - shattered with part of the glass missing and the wifi/bluetooth cable exposed. iPad worked fine, just left glass in your fingers!

My Fix

Took about 4 hours to completely remove all the broken glass. I applied tape as suggested, but this glass was just that messed up, pieces and sections of glass missing, so the tape could not provide enough stability. It did however help to not allow the broken glass to touch the LCD underneath. The iOpener worked well for the long straight almost intact edges, but for the little stuff left over once the main glass and LCD were removed I used a hairdryer on hot and low in short bursts along with tweezers and more tape. Once it was all gone, I turned the back over to shake out the loose tiny shards, and more tape & tweezers to get the stubborn spots. But the new glass went in smooth - and looks great! the kit was well worth the price!

My Advice

If glass is shattered (not just cracked) and you don't have patience find a professional. and be prepared to work on it slow and steady.

My Problem

We are a 1:1 school with iPads 3-8 grade. From time to time we need to repair the screens.

My Fix

Every year I get a new set of helpers. I teach them how to repair devices.

It's always a nervous time when they first remove an iPad screen but after two or three they get the hang of it.

My Advice

Take your time don't over heat the LCD while removing the glass. And watch out for the power cable in the top right. It's tricky especially if it is a secondary repair.

My Problem

Busted LCD

My Fix

Repair went ok

My Advice

I bought new lcd and digitizer because I was not sure if I can remove the digitizer without messing it up. The tools that came with it helped but I have to buy a heat gun and a tool better than a plastic spudger. With the heat gun set at 400 F it was easy removing the digitizer. I removed it without damaging it and I only have to replace the LCD. I also use a 4 clamps to make sure the digitizer stay in place especially I did not replace the adhesives. I clamped it for 2 hours and my IPad 2 looks great.

My Problem

Broken Screen on my ipad

My Fix

It was fairly straight forward the most difficult part was removing the broken screen...as mentioned using tape across the front will help with the little pieces of glass.

My Advice

Use the hot pad and take your time.

My Problem

Broken Front Panel

My Fix

Extremely difficult. Required the assistance of a skilled electronics/computer engineer friend

My Advice

Rule #1: Don't drop your iPad on a brick surface! Order the complete repair kit with the new home button and necessary tools. It will make your life much easier. Read all instructions and watch some You Tube repair videos before attempting this repair. Use a heat gun rather than the supplied heating pillow to loosen the sticky tape on the broken panel. It is difficult to get enough heat on the edges of the glass panel without a good heat source. Be extremely careful when removing the old panel to avoid damaging the bezel or antenna. Prior to removing the protective film on the sticky tape before final assembly, dry assemble the unit and verify that the home button and touch screen are fully functional. Handle the panel by its edges only. Avoid touching the screen or panel to prevent stray fingerprints. Finally carefully clean the screen and inside surface of the glass panel to ensure that both surfaces free of stray fingerprints and dust or fibers. Visually double check these surfaces again AFTER removing the sticky tape protective film from the panel BEFORE you stick it down! Removing the film may generate sufficient static electricity to attract stray dust or small airborne fibers to the surface of the panel. Once you stick the panel down any stray fingerprints, dust or fibers on the screen or inside of the panel will be there FOREVER! (Trust me on this, I know this from sad experience! And that is one of the reasons these electronic devices are assembled in clean rooms. In case you ever wondered!)

My Problem

My wife keeps dropping her I pad and breaking the screen

My Fix

The repair took no time at all since I have had to replace her screen 4 times now

My Advice

In stead of using the gel pack for heat use a hair dryer on high works faster and more direct heat

My Problem

A person cracked the display on the device

My Fix

Taking off the the original display is a pain as usual. There's glass everywhere and me wishing I had one of those fancy iFixit Tool Kits.

My Advice

Make sure to take your time and make sure to buy the iFixit Tool kit. I'm sure it would've made it 100 times easier if I had one.

My Problem

I dropped my iPad on the corner and it shattered the entire screen.

My Fix

Small Break = No Problem. Shattered = Difficult. It went well and not really that difficult normally, except my screen was extremely shattered so it was hard to remove the individual pieces of glass. If it only had a couple cracked areas then the repair would have been easy.

My Advice

When looking at the instructions online while repairing the iPad it says you can order special double sided tape. Don't panic! There is tape already mounted on the new screen. All you need to do is remove the protective tape. Also, make sure to oder the tool kit, because it is only like $5.00 extra. I had to buy a Heat Gun.