iPad mini & mini 2 Adhesive Strips

$6.95

Product code: IF122-010-1

Click Image To Zoom

 
 

iPad mini & mini 2 Adhesive Strips

$6.95

Product code: IF122-010-1

Product Overview

Keep your hard work safe and secure!

  • You managed the painstaking opening procedure and you repaired your tablet, now it's time to seal the deal.
  • These strips are custom cut specifically for the iPad mini.
  • Individual pieces fit precisely around important components and provide a sturdy closure.
  • Because of continuing improvements, actual product may differ slightly from photo.

Compatibility

Identify your iPad

  • All iPad mini (1st Gen)
  • All iPad mini (2nd Gen) Retina

Product Details

  $6.95

 

Condition:

New

Available: 50+

Add to Cart
 

Compatibility

iPad Mini
16 GB Wi-Fi
32 GB Wi-Fi
64 GB Wi-Fi
iPad Mini 2
128 GB Wi-Fi
128 GB Wi-Fi/Cellular
16 GB Wi-Fi
16 GB Wi-Fi/Cellular
32 GB Wi-Fi
32 GB Wi-Fi/Cellular
64 GB Wi-Fi
64 GB Wi-Fi/Cellular
iPad Mini CDMA
16 GB LTE/CDMA
32 GB LTE/CDMA
64 GB LTE/CDMA
iPad Mini GSM
16 GB LTE/GSM
32 GB LTE/GSM
64 GB LTE/GSM
 

Stories

My Problem

ipad went into the water during a boat race. would boot but screen was grayed out

My Fix

many small pieces and screws, otherwise ok

My Advice

.

My Problem

iPad Mini LCD was only showing a white line with no picture, but the hardware could be seen by the computer.

My Fix

Repair took a long time and was tedious...The iOpener pack was not getting hot enough to loosen the glue so i had to repeat the softening process several times, besides that the repair went well.

My Advice

Use a heat gun to loosen adhesive to make it easier and make sure you don't pull to hard on the digitizer or it will crack easily. Get the ifixit Jimmy it works great for the tough tight places.

My Problem

The battery had developed bad cells and wouldn't hold a charge for more than a minute or so. The iPad mini was otherwise intact so it made sense to try and replace the battery.

My Fix

There was a time after removing the LCD that the instructions weren't super clear about separating the LCD from some tape (but that could just be my special brain) but it otherwise went without a hitch.

My Advice

Take your time, don't get frustrated, and don't force things and you'll do fine =]