Huawei P9 Lite LCD Screen and Digitizer Assembly

  • Huawei P9 Lite LCD Screen and Digitizer Assembly / Black / Fix Kit
  • Huawei P9 Lite LCD Screen and Digitizer Assembly / White / Fix Kit
  • Huawei P9 Lite LCD Screen and Digitizer Assembly / Gold / Fix Kit
  • Huawei P9 Lite LCD Screen and Digitizer Assembly / Black / Part Only
  • Huawei P9 Lite LCD Screen and Digitizer Assembly / Black / Part Only
  • Huawei P9 Lite LCD Screen and Digitizer Assembly / White / Part Only
  • Huawei P9 Lite LCD Screen and Digitizer Assembly / White / Part Only
  • Huawei P9 Lite LCD Screen and Digitizer Assembly / Gold / Part Only
  • Huawei P9 Lite LCD Screen and Digitizer Assembly / Gold / Part Only
  • 360°
360
Huawei P9 Lite LCD Screen and Digitizer Assembly

$69.99

$69.99

We'll send a message when the product is back in stock.

Product Details

Description

Description

Replace a scratched, cracked, or malfunctioning display assembly with the front frame and edge bezel included. If you’re a repair pro—or need to save a little dough—check out the Huawei P9 Lite LCD Screen and Digitizer, a less complete assembly that requires separating the front glass from the front frame.

Part Assembly Includes

Part Assembly Includes

  • Front glass digitizer screen
  • 5.2 inch IPS LCD (1080 x 1920 pixel) display
  • Front plastic frame
  • Edge Bezel

Kit Contents

Kit Contents

Note

The assembly you receive may differ slightly from what is pictured. There may be some small parts (like rubber gaskets or bezels) that need to be transferred over from your original part to the new part.

Compatibility

Huawei P9 Lite
(VNS-L21)
(VNS-L22)
(VNS-L23)

Repair Stories

Scott Cassio's Story Photo #885867

My Problem

Cracked front panel assembly

My Fix

The repair is pretty straight forward until the conclusion which states, 'But first ensure to place a narrow piece of tape over the copper/silver at the bottom of the digitizer to the left and right of the home button.'

Since there was no tape in those areas when I took . . .

My Problem

Old battery couldn't hold a charge for long.

My Fix

Your tools made getting into the case easy. The only problem was getting the old battery out... Too much original glue!

The supplied tools made the job much easier.

My Advice

Don't try to open the case with your fingernails!

My Problem

Spider web screen

My Fix

Repair went very well instructions were plain enough was a little nervous of crushing a connector after the first one was in it was smooth sailing about an hour to do

My Advice

Go slow take your time and follow instrutions

My Problem

Accidentally dropped my phone right on the back.

My Fix

With a heat gun on low the glue softened up very easily. Needed something sharper and thinner to get under the glass but once I did it peeled off easily. Removed all the old glue with a knife to hopefully retail some water resistance.

My Advice

Use the heatgun . . .

My Problem

Screen was badly cracked after bing dropped on corner of iPad.

My Fix

Repair went smoothly. No major issues but needed another tool to make it really work.

My Advice

Need to stay patient as it's tedious work getting the screen off. After that it's pretty easy. The plastic tool to pry open the screen from the edge isn' . . .

My Problem

My wife's phone. She cracked her LCD screen

My Fix

The "Ifixit" video manual was to the point and quite accurate except a couple of things. On this particular phone the original adhesive refused to let go after heating the chassis several times. The iSclack was not strong enough to lift the rear cover loos . . .

My Problem

My power switch was stuck. I bought a spare part off eBay.

My Fix

You guys rated the fixability a "1" and I completely agree. What a pain. I was able to get the switch replaced and the unit works except that when I was using the picks I pushed one in too far and it broke the digitizer membrane on the top-le . . .

My Problem

Cracked Screen

My Fix

Great!

My Advice

Becareful where you order your screens. I had to do this twice!!

My Problem

Kindle would not charge unless you did the wire dance ( moved it all over) until you find the spot that if you're lucky will charge after you sit it down . Got to the point that I had to do it without moving the Kindle.

My Fix

Very well, you just have to pay attention to details.

My Advice

Have a clean surface and all . . .

My Problem

iPad 4th Gen WiFi with a broken front glass.

My Fix

The instructions were great except that for some reason, they assumed that I would be replacing an intact glass panel. Mine was broken in 4 lines, and every time I got to another break, it would shatter down to powdered glass and glue (Yes I know it is 3M . . .

Show more