Menu
Your Settings
Cancel
This product is not available in your country.
Item Code: IF258-018-1
This product is not available in your country.
Condition: Used
$14.99
iFixit Pro discount applied. Reg:
$14.99
A-Stock used parts are in excellent condition
B-Stock parts have minor cosmetic wear
C-Stock parts have major cosmetic wear but are fully functional
$14.99
iFixit Pro discount applied. Reg:
$14.99
Out of Stock
Ready to Ship
Out of Stock
Ready to Ship
We don't have that much stock available
Product Details
Description
Description
Compatibility
Compatibility
Repair Guide
Repair Stories
This is my fairly new Dell XPS 13 (9360), 7 months old. The battery stopped working so I ordered a new one to replace it.
Disassembly / reassembly as specified in the IFIXIT article worked exactly as specified. I removed the original battery, opened up the package I had ordered with the new battery, and lo and behold, they had sent me a battery for a different machine, possibly an XPS 15. It was too big and NOT the same battery at all. So I reseated and attached the original battery, reassembled the back casing of the laptop, and voila - it worked and I didn't need to replace it after all. I'm now in the process of swapping the battery sent for the proper model.
If I did this again, I'd try removing and reseating the old battery before bothering to order a replacement. In the old days, whether with operating with server / desktop components (which were simple to access and reseat), or checking out the old fashioned click out/in "user replaceable" batteries, this would have been a no-brainer habit. Doing it on a thin, small laptop these days, having to deal with over a dozen tiny screws and tiny sockets and connectors, makes it tempting to skip reseating, assume the component will need replacing, and thereby save at least one disassembly/reassembly cycle. This was exacerbated by this being a fairly new and expensive laptop which is still under partial warranty, so didn't want to screw anything up (no pun intended). Lesson learned ...
This is my fairly new Dell XPS 13 (9360), 7 months old. The battery stopped working so I ordered a new one to replace it.
Disassembly / reassembly as specified in the IFIXIT article worked exactly as specified. I removed the original battery, opened up the package I had ordered with the new battery, . . .
No power, dead battery, etc.
I decided to do a couple of other errands since I was going to be in the area :) .... so I replaced the Fan ( ...still good but 9 years old ! ) , Subwoofer/Right Speaker, & the Left Speaker ( BOTH speakers bad ; buzzy, garbled sound ...) , as well as the defective MagSafe DC-IN Board.
The guides were the best and were very easy to 'layer/sequence' in w/ each other to facilitate multiple installation/repairs w/o re-tracing steps or doing things twice, etc.
The whole thing took 4-hours... but entirely enjoyable... especially for a beginner!
It really helped in doing a simultaneous 'multiple repair' to 1st PRINT out a hard-copy of each separate repair guide before starting in w/ the tools! Then using a 'highliter' pen & sharpie to jot down notes... I was able to mix & match on the fly ... jumping to whichever specific repair guide I needed at the time . I maintained the MagSafe DC-IN Board guide as a 'MASTER' guide because it described the most extensive disassembly procedure. The other repairs (Fan, Left Speaker, Right Speaker) then dove-tailed in nicely since most of the disassembly required was ALREADY DONE & I could skip to the uniquely relevant features of EACH repair guide quickly as needed !!
Read through the Repair Guides online a couple of times... scanning the 'comments' to get a picture of some of the tight spots others have run into!!
Also, hard-copy PRINT outs of the repair guide are great if you're a messy, excitable type who likes to plunge right in & have fun w/ tools scattered all over the place quickly!! ( I DIDN'T even have any ((safe, stable)) space on my worktable for a laptop to easily consult the online repair guides. )
As I juggled & threw the repair guide(s) around, pages floated to the floor more than once... but harmlessly!
Hard copy repair guides are also great for MARKING up w/ 'notes' as you go... sometimes it's nice when traveling the RETURN (re-assembly) path to see a choice 'hint' about putting the thing back together that you scrawled an hour earlier when you were happily tearing something apart... it can really help . (The re-assembly can be slightly tricky since if you're a novice like me , you're trying to go through the repair guide 'backwards' and you have to concentrate a bit more than when 'rushing' forwards through it the first time!)
No power, dead battery, etc.
I decided to do a couple of other errands since I was going to be in the area :) .... so I replaced the Fan ( ...still good but 9 years old ! ) , Subwoofer/Right Speaker, & the Left Speaker ( BOTH speakers bad ; buzzy, garbled sound ...) , as well as the defective MagSaf . . .
I broken the display.
With your help very early.
How long do i have warranty?
Had to change micro SD card slot in Nintendo switch. Super glue got into it.
Good
Don’t use super glue near a nintendo switch.
The battery died from age and repeated charges.
I was able to remove the battery without difficulty after carefully following all the steps listed--and will all the recommended tools I purchased from ifixit. Now I'm just waiting on my new watch battery to arrive from an outside vendor, so that I can reassemble the watch again, hopefully as good as new!
Follow the ifixit instructions methodically and don't rush it!
The battery died from age and repeated charges.
I was able to remove the battery without difficulty after carefully following all the steps listed--and will all the recommended tools I purchased from ifixit. Now I'm just waiting on my new watch battery to arrive from an outside vendor, so that I can . . .
- 03/09/2018
Dead swollen battery & slow memory
Pretty Smooth some of the screws were hard to loosen up.
I was at first affraid of opening the computer to make the repairs & put it off for years . I wish I had done it sooner.
My optical drive had failed sometime in the past. I rarely used it. Recently I was doing upgrades to other components and decided to replace the Superdrive.
The repair went very well. I was surprised when the internals of my MacBook did not quite match the repair guide. I had to rely on some personal experience and skill to complete the repair.
Always be mentally prepared for exceptions.
My optical drive had failed sometime in the past. I rarely used it. Recently I was doing upgrades to other components and decided to replace the Superdrive.
The repair went very well. I was surprised when the internals of my MacBook did not quite match the repair guide. I had to rely on some per . . .
Battery expired
Video made it easy along with the tools I purchased
I would just say that whomever is considering doing this buy the tools. They are a few bucks but made this job simple.
Tried to remove battery to replace original that was not holding a charge very long
The blue pry tools got the chassis opened, with a little effort to get the front/back separated
The small locking tabs that hold circuit strips are very small and take no effort to open. Unfortunately for me, the blue pry tool was under the connector, not the lock, and I broke it off the circuit board. I now have a tablet paperweight. Rats.
Tried to remove battery to replace original that was not holding a charge very long
The blue pry tools got the chassis opened, with a little effort to get the front/back separated
The small locking tabs that hold circuit strips are very small and take no effort to open. Unfortunately for me, the blue . . .
My tablet was stuck on bootloop for a few months, and after flashing every stock ROM file I could find, I found that it was the motherboard that was faulty.
The repair was easier than I thought, and it took less time than I thought! It was my first time repairing hardware so it was really exciting to see all of the parts and be able to make sense of them.
Take a picture before you take everything apart to use it for reference later on. Keep all your screws in one place so you don't lose them. And be extra careful with the wires and stips you disconnect!
My tablet was stuck on bootloop for a few months, and after flashing every stock ROM file I could find, I found that it was the motherboard that was faulty.
The repair was easier than I thought, and it took less time than I thought! It was my first time repairing hardware so it was really exciting to . . .
Show more
Show less
Customers also bought
