Tablet Case Components - Page 5

Interior frame for the 1st generation 7" Kindle Fire HD

Black plastic rear case for the 7" Kindle Fire HDX

Rear plastic case panel for the 2nd generation Kindle Fire HD 7".

Replace a scratched or missing exterior plastic case bezel the upper fits the edge of the Kindle Fire HDX 7" case.

This metal bracket backs up the microphone assembly.

Replace a scratched or missing exterior plastic case bezel for the edge of the 3rd generation APOLLO Kindle Fire HDX 8.9" case.

Replace a pair of magnets mounted on the inside of the LCD/Digitizer assembly compatible with the 3rd generation APOLLO model Kindle Fire HDX 8.9 inch Wi-Fi and Cellular e-reader.

Replace a metal rear camera enclosure compatible with the Kindle Fire HDX 8.9 inch model.

Rubber grommet that fits between the front facing camera and the digitizer glass.

Replace the internal plastic frame assembly that holds the camera. This assembly includes a sensor and antenna.

Replace a missing or damaged SIM card tray.

Replace a scratched or damaged rear panel. This part is compatible with a 1st generation 2012 model Google Nexus 7.

Replace a damaged middle support frame. This part is compatible with a 1st generation 2012 model Google Nexus 7.

Replace a scratched or damaged rear case. This part is compatible with the 2nd generation 2013 Wi-Fi model Google Nexus 7 (manufactured by Asus).

Replace a broken or missing spring clip on the back of the 1st generation iPad display screen.

Replace the broken or missing spring clips on the back of the first generation iPad display screen with this part.

Replace a broken or damaged front panel digitizer assembly for your first generation iPad with this part. This assembly includes the frame, home button and clips.

Replace one or both missing or damaged digitizer magnets mounted on the inside of the front panel of a 1st or 2nd generation iPad mini. These magnets activate the sleep/wake sensors.

Replace a LCD Shield Plate compatible with the A1454 and A1455 4G iPad mini Cellular model tablet.

Replace a bent or missing SIM card tray for the GSM/AT&T iPad 2.

Replace the metal retaining clip bracket and thermal pad that fit over the rear-facing camera compatible with the 2nd Generation iPad model A1395, A1396, and A1397.

Replace the plastic enclosure for the rear facing camera compatible with the 2nd Generation iPad model A1395, A1396, and A1397.

This blank rear aluminum panel fits model A1395 iPad 2 EMC 2415.

This is the rear aluminum panel for model A1395 iPad 2 Wi-Fi EMC 2415.