Samsung HMX-F90 LCD Screen Replacement

Step 1 LCD Screen



• Rotate the camcorder so that back is facing you. Then flip open the LCD screen.
• Locate and remove the 4.5mm Phillips #00 screws in the LCD screen base.
Step 2



• Close the LCD screen. Then lift the silver base away from the camcorder.
Step 3
• Rotate the camcorder so that it is facing you.
• Locate and remove the two 4.5mm Phillips #00 screws.
Step 4
• Open the LCD screen and rotate it around 90 degrees.
• Locate the small prying notch and use a prying tool to slowly remove the LCD cover.
Step 5
• Locate and remove the two 3.5mm Phillips #00 screws holding the back cover.
Step 6
• With tweezers gently unclip the silver tab holding the ribbon wire.
• Gradually feed the ribbon wire through the hole to remove the screen.

Author

with 1 other contributor

Amir Harb

Member since: 09/26/17

705 Reputation

6 Guides authored

Badges: 12

• 
• 
• 

+9 more badges

Team

USF Tampa, Team S13-G1, Boczar Fall 2017 Member of USF Tampa, Team S13-G1, Boczar Fall 2017

USFT-BOCZAR-F17S13G1

4 Members

12 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview