Samsung BD-H5100 Disk Reader Replacement

Step 1 Disk Reader

• Use the Phillips Head #2 screwdriver to remove the three 10 mm screws on the back panel.
Step 2




• Use the plastic spudger to pry open the top panel.
• Be careful not to break the ribbon connecting the motherboard on the bottom panel to the top panel.
Step 3
• Pull the ribbons gently from one corner by the blue tabs to remove it.
Step 4
• Remove the two 7.5 mm screws on both sides of the disk tray with Phillips Head #2 screwdriver.
Step 5
• Push two small prongs on both sides inwards and push forward.
• Remove the disk tray.
Step 6
• Flip the disk tray upside down.
Step 7
• Use the Phillips Head #00 screwdriver to remove the four 6.2 mm corner screws.
Step 8
• Flip the disk reader up like a flip phone.
• Be careful not to break the ribbon.
Step 9
• Pull the ribbon out gently from one corner by the blue tab.

Author

with 3 other contributors

Mira Patel

Member since: 10/11/16

580 Reputation

5 Guides authored

Badges: 10

• 
• 
• 

+7 more badges

Team

USF Tampa, Team 1-2, Leahy Fall 2016 Member of USF Tampa, Team 1-2, Leahy Fall 2016

USFT-LEAHY-F16S1G2

3 Members

5 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview