Introduction
The seals/gaskets of any brewing unit are under constant strain. Particularly the large O-Ring on the piston needs replacing from time to time. These instructions show how this is done.
What you need
-
-
-
You can push out the lower piston from the brewing unit if you snap the deflection lever out of its socket with a screw driver.
-
Clean all parts with very hot water and dishwasher liquid.
-
Grease all moving parts with food grade silicone fat. Dont forget the tracks in the side panels.
-
Apply these steps in reverse order to re-assemble the device.
Apply these steps in reverse order to re-assemble the device.
Cancel: I did not complete this guide.
4 other people completed this guide.
Special thanks to these translators:
100%
jana° is helping us fix the world! Want to contribute?
Start translating ›