Skip to main content

Introduction

When the Coffee Spout Manifold is clogged with f. E. coffee fat, then the coffee only comes out in spurts, often out of only one of the two jets. The Spout Manifold is a sealed-off compartment with venting valves, which doesn't open and is hard to clean. The replacement part doesn't cost much and the replacement is fairly easy.

  1. Remove the plastic plate with the 'Nivona' label carefully with a plastic opening tool. Remove the plastic plate with the 'Nivona' label carefully with a plastic opening tool.
    • Remove the plastic plate with the 'Nivona' label carefully with a plastic opening tool.

  2. Behind it, you'll find a chrome bezel. It is mounted at the marked spots.
    • Behind it, you'll find a chrome bezel. It is mounted at the marked spots.

    • Push the mounting points with a plastic opening tool to the side and remove the bezel carefully.

  3. Remove the LEDs of the cup lighting  from their holding clips and bend them aside. Leverage the holder of the lighting element off and remove it. Leverage the holder of the lighting element off and remove it.
    • Remove the LEDs of the cup lighting from their holding clips and bend them aside.

    • Leverage the holder of the lighting element off and remove it.

  4. Now it is possible to remove the keypad with the display, it is only held by clips. Remove it carefully by hand. The keypad is connected by a large wire harness to the machine. The wire harness won't be removed,  the keypad will only be pushed out of the way. The keypad is connected by a large wire harness to the machine. The wire harness won't be removed,  the keypad will only be pushed out of the way.
    • Now it is possible to remove the keypad with the display, it is only held by clips. Remove it carefully by hand.

    • The keypad is connected by a large wire harness to the machine. The wire harness won't be removed, the keypad will only be pushed out of the way.

  5. Now the spout is easily accessible. It is only fixed in place by clips and can be removed via a flat screwdriver or spatula. The spout is now only connected to the coffee hose made of silicone. The spout is now only connected to the coffee hose made of silicone.
    • Now the spout is easily accessible. It is only fixed in place by clips and can be removed via a flat screwdriver or spatula.

    • The spout is now only connected to the coffee hose made of silicone.

  6. Pull the silicone hose off the coffee spout.
    • Pull the silicone hose off the coffee spout.

    • The coffee spout is disconnected.

Conclusion

Repeat the steps in reverse order to reassemble the device.

Special thanks to these translators:

de en

90%

These translators are helping us fix the world! Want to contribute?
Start translating ›

VauWeh

Member since: 10/19/2015

136,258 Reputation

175 Guides authored

3 Comments

Toll beschrieben mit super Fotos.

Einfach sich Gedanken gemacht wie man es Schritt für Schritt es einem mitteilen kann wie es gemacht wird.

Super!

Gruß

Thomas

t.ohl - Reply

Super genaue Schritt für Schritt Anleitung und Fotos.

Einfach! toll

Gruß

Thomas

t.ohl - Reply

Freut mich, wenn es nützt.

VauWeh -

Add Comment

View Statistics:

Past 24 Hours: 6

Past 7 Days: 30

Past 30 Days: 116

All Time: 3,566