Motorola Slvr L7 Camera Assembly Replacement

Step 1 Camera Assembly

• Push down on the black tab located at the top center of the Motorola phone.
Step 2
• To ensure safety, discharge your phone battery below 25% before starting. A fully charged lithium-ion battery may cause a fire and/or explosion due to defects or damage.
• Turn off your phone before beginning disassembly.
Step 3
• Remove the battery by pulling the battery from the top center.
Step 4
• Remove the four (4) T6 Torx screws from the back of the metal back plate.
Step 5
• Insert the flat end of a spudger and pry the metal cover up off the phone.
Step 6
• Carefully, disconnect the two connectors from their sockets on the motherboard using the flat end of a spudger.
Step 7
• Use a spudger to pry the antenna cable connectors from its respective socket on the motherboard.
• De-route the antenna cable by pulling it out.

Author

with 8 other contributors

Jorge Trujillo

Member since: 05/19/11

520 Reputation

4 Guides authored

Badges: 7

• 
• 
• 

+4 more badges

Team

CSU Los Angeles, Team 1-1, Nelson Spring 2011 Member of CSU Los Angeles, Team 1-1, Nelson Spring 2011

CSULA-NELSON-S11S1G1

2 Members

4 Guides authored

Embed this guide

Choose a size and copy the code below to embed this guide as a small widget on your site / forum.

Preview