Skip to main content

Parts

No parts specified.

  1. Push down on the black tab located at the top center of the Motorola phone.
    • Push down on the black tab located at the top center of the Motorola phone.

  2. Remove the battery by pulling the battery from the top center.
    • Remove the battery by pulling the battery from the top center.

  3. Remove the four (4) T6 Torx screws from the back of the metal back plate.
    • Remove the four (4) T6 Torx screws from the back of the metal back plate.

  4. Insert the flat end of a spudger and pry the metal cover up off the phone. Insert the flat end of a spudger and pry the metal cover up off the phone.
    • Insert the flat end of a spudger and pry the metal cover up off the phone.

  5. Carefully, disconnect the two connectors from their sockets on the motherboard using the flat end of a spudger. Carefully, disconnect the two connectors from their sockets on the motherboard using the flat end of a spudger.
    • Carefully, disconnect the two connectors from their sockets on the motherboard using the flat end of a spudger.

  6. Use a spudger to pry the antenna cable connectors from its respective socket on the motherboard. De-route the antenna cable by pulling it out.
    • Use a spudger to pry the antenna cable connectors from its respective socket on the motherboard.

    • De-route the antenna cable by pulling it out.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Jorge Trujillo

Member since: 05/19/2011

499 Reputation

4 Guides authored

Team

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 2,735