Introduction
The O-Ring is fragile. Take care not to let it break when dealing with it.
What you need
-
-
Set the watch face down on a flat surface.
-
Place the heated iOpener on the face of the rear cover to loosen the adhesive underneath.
-
-
-
Follow the instructions here to remove the back cover without force by using some needles in the right places:
-
Then continue with step 5. Or don't use needles and just continue with the next steps.
-
-
-
-
Gently slide the blue opening pick between the rear cover and the metal casing.
-
Work your way entirely around the rear cover.
-