Fix Your Stuff Community Store

DeLonghi ECAM back panel removal

Introduction

For most repairs, the machine must be opened. The first step is to take the back off.

What you need

  1. DeLonghi ECAM back panel removal, DeLonghi ECAM back panel removal: step 1, image 1 of 1

    • Unplug the power cord!

    • Remove all attachments such as water tank, pulp drawer, brew group.

    • Turn the machine with the back facing you.

    • Remove five Torx T20 security screws.

    • A small hurdle: These screws have a pin in the middle, so the screwdriver must have a hole.

    Translate

  3. DeLonghi ECAM back panel removal: step 2, image 1 of 2 DeLonghi ECAM back panel removal: step 2, image 2 of 2

    • Lift out the back.

    • The following components are immediately visible:

    • grinder

    • pump

    • flowmeter

    Translate
Conclusion

Work the steps in reverse order to reassemble your device.

Special thanks to these translators:

de en

100%

dismalbread4106 maps

Annika Faelker

These translators are helping us fix the world! Want to contribute?
Start translating ›

Author

with 1 other contributor

VauWeh

Member since: 10/19/15

205,513 Reputation

250 Guides authored

Badges: 44

+41 more badges

Team

Repair is War on Entropy Member of Repair is War on Entropy

Community

25 Members

1,152 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 15

Past 7 Days: 77

Past 30 Days: 327

All Time: 5,477