Fix Your Stuff Community Store

DeLonghi ECAM Series left side panel

Introduction

For most repairs, also the left side panel has to be removed. This guide shows how to do that.

What you need

  1. DeLonghi ECAM Series left side panel, DeLonghi ECAM back panel removal: step 1, image 1 of 1

    • Unplug the power cord!

    • Remove all attachments such as water tank, pulp drawer, brew group.

    • Turn the machine with the back facing you.

    • Remove five Torx T20 security screws.

    • A small hurdle: These screws have a pin in the middle, so the screwdriver must have a hole.

    Translate

  3. DeLonghi ECAM Series left side panel: step 2, image 1 of 2 DeLonghi ECAM Series left side panel: step 2, image 2 of 2

    • Lift out the back.

    • The following components are immediately visible:

    • grinder

    • pump

    • flowmeter

    Translate

  4. DeLonghi ECAM Series left side panel, DeLonghi ECAM Series left side panel: step 3, image 1 of 3 DeLonghi ECAM Series left side panel, DeLonghi ECAM Series left side panel: step 3, image 2 of 3 DeLonghi ECAM Series left side panel, DeLonghi ECAM Series left side panel: step 3, image 3 of 3

    • Push the side panel back about 1.5 cm.

    • Lift off the panel.

    • The following compononents are exposed:

    • Heater

    • Expansion chamber

    • Gear drive

    • Steam valve

    Translate
Conclusion

To reassemble your device, follow the above steps in reverse order.

Special thanks to these translators:

de en

100%

VauWeh

VauWeh is helping us fix the world! Want to contribute?
Start translating ›

Author

with 1 other contributor

VauWeh

Member since: 10/19/15

205,513 Reputation

250 Guides authored

Badges: 44

+41 more badges

Team

Repair is War on Entropy Member of Repair is War on Entropy

Community

25 Members

1,152 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 22

Past 30 Days: 78

All Time: 945