Late 2011 model, A1278 / 2.4 GHz i5 or 2.8 GHz i7 processor.

349 Questions View all

How to replace camera cable?

I broke the connector(camera cable), the one that is attached to the motherboard.

I ordered a new cable.

but now how do I connect it?

I need to remove only the plastic cover?

any manual or how to?

thank for answers.

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

The camera cable routes up through the display assembly to the camera board above the LCD. To completely remove it you have to pull off the display glass. It's a very delicate procedure, so be careful and work slowly.

Was this answer helpful?

Score 1

Comments:

well, but my is 2011, a you sure my case is the same?

by

by the way, my macbook still under in 1 year warranty, so in this case the can replace cable , or they reject to replace cable?

by

The unibody display assemblies have been nearly identical for 4 years. If your computer is under warranty, what were you doing to break the cable? Assuming there are no traces of you interfering with the laptop, they should honor your warranty.

by

Add a comment

Add your answer

ressac will be eternally grateful.
View Statistics:

Past 24 Hours: 1

Past 7 Days: 12

Past 30 Days: 47

All Time: 3,852