Model A1311 / Mid 2010 / 3.06 & 3.2 GHz Core i3 or 3.6 GHz Core i5 Processor

233 Questions View all

iMac does not power up

Hello, i have a mid 2010 21.5 imac that refuses to power up. The #1 diag led is on but as soon as i press the power button the led turns off and does not come back on unless i unplug the imac from the wall. No other led light up at any point.

Do you think this is a bad PSU or logic board?

Answered! View the answer I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Chosen Solution

Your LEDs indicate a failed power supply.

Was this answer helpful?

Score 3

Comments:

Thanks, i ordered a new psu. I will let you know if this fixed the problem.

by

Hello, i replaced the psu but the leds still act as before. I tried disconnecting all non essential components and that did not help. I am guessing this is a logic board error.

by

Add a comment

Add your answer

kalt will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 1,005