Fix Your Stuff Community Store

Guides and repair information for washing machines produced by Maytag, a subsidiary of Whirlpool.

325 Questions View all

Options

Having trouble removing the main top panel of Maytag washer

Having trouble removing the main top panel of Maytag washer MVW7232HWO. I removed the 3 screws in the back of the washer and then tried to lift and pull the main panel forward without success. It will not budge. Please help

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Most Helpful Answer

Options

Hi @frank27307

Here are some videos that may help.

video 1 video 2

Was this answer helpful?

Yes No
Score 1

13 Comments:

I’m still having trouble sliding the top panel forward enough to lift it. I tried to pry it with a screwdriver and it moves somewhat, but not enough. I applied lubricant, and even hit the back with a rubber mallet without success. What do I do now?

by

@frank27307

Did you remove the screws that hold the cover onto the back of the control panel?

by

Yes, I removed the 3 screws

by

The first technician that I spoke with from ifixit told me there was a manufacturer recall for this condition (removing the top cover).

by

@frank27307

I meant all the other screws along the bottom edge of the back panel that hold the back panel onto the control panel.

In all of the videos I checked they have been removed as well even though the back panel is still on.

Best I can count is that there's 3 possible 4 plus the 3 that you removed.

by

Show 8 more comments

Add a comment

Add your answer

Frank will be eternally grateful.
View Statistics:

Past 24 Hours: 6

Past 7 Days: 72

Past 30 Days: 296

All Time: 716