Fix Your Stuff Community Store

Guides and repair information for washing machines produced by Maytag, a subsidiary of Whirlpool.

324 Questions View all

Options

says “done” even though it didn’t do anything.

Can someone please help me? I am helping a friend with their Maytag washing machine model #: mvw6200kw2 and when I start it, it makes 3 sounds and then says “done” even though it didn’t do anything. I got into diagnostic mode and tested it and the code has “wash” “Rinse/Spin” “Done” and the “Lid Locked” buttons blink once and then “Done” blinks once by itself. I cannot figure out what the code means. Looked for hours on the internet to try to find out what the code means. Please help…

Answer this question I have this problem too

Is this a good question?

Yes No
Score 0
Add a comment

1 Answer

Filter by:
Most Helpful Newest Oldest
Most Helpful Answer

Options

Hi @stormchaser320

Here's an image that may help to interpret the codes in a Maytag machine.

Block Image

(click on image)

I can't find a user manual for the machine so I don't know the order or designation of the LEDs on the machine but hopefully there are also only the 4 LEDs along the top row of the machine (see LED Group 5 and 6 in the tech sheet image below)

Here's the tech sheet for the washer that shows what the codes mean

If you find the problem and it is a part that needs replacing, here's a parts list that is useful.

Locate the wanted part in the list and you'll find the manufacturer's part number listed with it. Search online for the part number only to find suppliers that suit you best.

Was this answer helpful?

Yes No
Score 1
Add a comment

Add your answer

StormChaser320 will be eternally grateful.
View Statistics:

Past 24 Hours: 3

Past 7 Days: 6

Past 30 Days: 26

All Time: 82