Mac Pro Powers On for 10 seconds before turning off
I have a Mac Pro 6,1 2013 which turns on for a few seconds, then turns back off, where do I start with diagnosing the issue?
Is this a good question?
I have a Mac Pro 6,1 2013 which turns on for a few seconds, then turns back off, where do I start with diagnosing the issue?
Is this a good question?
Sounds like a Failed Logic Board :(
Part: https://www.thebookyard.com/product.php?... (UK)
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 1
All Time: 35
3 Comments
Update: Based on the I/O board diagnostic LEDs, I'm not transitioning into EFI boot (S0), the platform reset release LED doesnt light up
by Irvin Goh
@Irvin Goh
Is it detected by an external display or a tv?
Thanks:-)
by HelloMacOS
It's connected to a monitor via hdmi
by Irvin Goh