Screen not sitting in frame, screen seems slightly too large
Just got my new screen in for the iPhone X, the repair itself went fine and the screen works great, however, when I try and finish the repair by putting the screen back into the frame it won’t fit! SIM card slot had been taken out already, it’s like there’s a border going around stopping it from going in properly
Is this a good question?
9 Comments
can you post some pictures to give us an idea of what's going on?
by Jesse Hooton
Just added pictures
by Stuart Black
Have you checked that the metal frame from the old screen is also taken out and isnt left in the housing?
by Leslie Leslie
Yes the old screen was a bad third party one. I barely had to pry it out, it was missing the metal brackets on the sides and it also didn’t have the microphone and earpiece that you switch over. There’s nothing there. I thought it was the black piece that goes around the whole phone. But there’s a metal bit inside on the left and it seems to be stopping the metal brackets going down, could it be that? Seems like it supposed to be there
by Stuart Black
Can you post a pic ( a close up one) or is your housing bent or having a dent in the corner?
by Leslie Leslie
Show 4 more comments