Rep: 685.3k
3.4k
1.1k
2.6k
I try to keep adhesive strips in stock for both the 21.5” and the 27” iMacs. I noticed the the parts are now using higher numbered strips than what I am installing. Does anyone know why the number change? These are definitely for the 27” models. Are they just old stock or were they replaced by better strips?
Is this a good question?
Rep: 479.9k
35
329
971
I go by the part numbers as an example the original 2012 ~ 2015 27” models have the following: 076-1419, 076-1444, 076-1416, 946-4547, 946-4548, 946-4549, 946-4551, 946-4550 & 946-4552 for their tapes
The 2016 ~ 2019 models use this set: 076-00332, 076-00330, 946-4552, 946-03774, 946-01031, 946-03775, 946-07462 & 946-07463
The real difference is the holes for the microphone. You can use either tape set as long as the holes needed for the microphone is in the correct location.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 7
Past 30 Days: 14
All Time: 173
