Power head movement while mixing dough
the power head seems to move slightly where it attaches to the base (neck area) while operating mixing dough. Basically is loose where the swivel pin is.
Is this a good question?
Score
0
679141
1 Answer
Most Helpful Answer
Rep: 685.3k
3.4k
1.1k
2.6k
Make sure the lever on the right side of the machine is pulled all the way forward, locking it in place.
Was this answer helpful?
Score
1
It is somewhat loose at the neck where the power head joins the base. If I remove the large pin that the head rotates on, will the head come off to determine the problem.
1 Comment
what the !&&* is this . I am looking for an answer
by tom lenfestey