Skip to main content

The OnePlus 6T is an Android smartphone made by OnePlus. It was announced on October 29, 2018 and released on November 6, 2018.

26 Questions View all

The guides are missing the part where you put back the back cover

  • Do you have to buy an adhesive?
  • Do you have to apply fresh silicon ?
  • Do the new back covers come with pre-applied adhesive or silicon ?
  • Does the existing material of the old back cover glue back if heated ?


Answer this question I have this problem too

Is this a good question?

Score 0
Add a comment

1 Answer

Most Helpful Answer

Typically you peel off the old adhesive and replace it with new stuff. Don’t use silicone, use something like Tesa black tape. Some parts suppliers will sell precut adhesive for most devices. Some suppliers will also sell back covers with new adhesive either already attached or you need to apply it. In some cases, if you cut through the adhesive clean enough you can reuse it. Just put the back cover back on, use some heat from a heat gun or hair dryer, and then either clamp it down for about 20 minutes or put some heavy books on it.

Was this answer helpful?

Score 1
Add a comment

Add your answer

kriegalex will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 14

All Time: 160