Skip to main content

Released November 4, 2017. Model A1865, A1901. Available as GSM or CDMA / 64 or 256 GB / Silver or Space Gray. (Pronounced the same as "iPhone 10.")

1203 Questions View all

Apple iPhone X restarting after screen and charging port replace

Hello, the device is Apple iPhone X and i replaced the screen with original and charging port because it’s was broken.After replacement the phone started restarting itself after a little load with app and I feel warming on back cover.

In Analystic Data shows this in the photos…

Missing sensor “mic1”

Can you someone help me with this problem ?

Block Image

Block Image

Answer this question I have this problem too

Is this a good question?

Score 0
1 Comment

First thing's first, double-check all of your flex cable connections. Second, have you tried unplugging the charging port and then booting up the iPhone?

by

Add a comment

1 Answer

Most Helpful Answer

I really can’t understand the messages, but there is one little bit that stuck out to me in that area in red. “Missing sensor(s): mic1 \nno successful checkins since load (60 seconds ago)” is what caught my attention.

I think you may have a faulty or aftermarket port. iPhone X and above are picky when it comes to aftermarket ports so you must use premium/OEM ports. If there’s an issue with the port it can lead to issues like this as well.

Was this answer helpful?

Score 2
Add a comment

Add your answer

kaloqn will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 9

Past 30 Days: 31

All Time: 1,606