Hi,
i just ripped the capacitor in the red circle off, it is the same one as in the green circle.
Can someone tell me, what capacitor this is exactly and - preferrably - where to get one?
I googled some time and wasn’t able to find this part unfortunately.
I just learned that this is in fact an inductor…
Is this a good question?
Rep: 85
2
I found the following datasheet:
https://johansondielectrics.com/download...
Just measure the size of that inductor, and you can find out what part number you need.
Was this answer helpful?
Rep: 50.7k
8
14
101
This is what you are after. Component “L7960” (1UH-20%-11A-0.0127OHM) Digikey or mouser should have them in stock if you cannot source from another board.
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 1
All Time: 77
2 Comments
@deichstein - Finding the specs of the inductor will require finding the board number which starts off with 820-????? (a five digit number).
That way we are sure to get the correct value reviewing schematics and boardview drawings.
Then you can look it up at one of the electriconics parts suppliers.
by Dan
Thanks Dan! Could this number be printed on the backside of the board? I couldn't immediately find it on the frontside...
by Sam Deichstein