Fix Your Stuff Community Store

Google's third-generation Pixel-branded smartphone, and their first "notched" phone. Comes with a 6.3" QHD+ OLED display and 64 or 128 GB of storage. Available in Nearly White, Just Black, or Not Pink.

77 Questions View all

Options

micro solder part for finger print reader Pixel3XL

I am having trouble sourcing the connector that is soldered onto the motherboard for the finger print reader. The one that has the black flap to lock the ribbon cable in place. if anyone could assist where i could find this part it would help greatly. thank you

Answer this question I have this problem too

Is this a good question?

Yes No
Score 2
Add a comment

2 Answers

Filter by:
Most Helpful Newest Oldest
Most Helpful Answer

Options

If you cannot source one from another board I would suggest searching Digikey and Mouser. They should have something that’s compatible.

Was this answer helpful?

Yes No
Score 2

1 Comment:

Can anyone describe the process of sourcing the fingerprint connector from the Pixel 3Xl. I would prefer to source it from one of my broken 3xl's than to find and pay some minimum rate for it to be micro soldiered. Is the connector on a board that I can removed my from for parts phone and replaced on my repairable phone?

by

Add a comment

Options

I think I found it here….

https://www.digikey.com/en/products/deta...

Was this answer helpful?

Yes No
Score 0
Add a comment

Add your answer

phillip lvov will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 13

All Time: 211