I am replacing my screen/frame but I have a single screw that was inserted too tight by the machine during manufacturing. Also, the head was stripped, I can't get it out and neither can phone repair stores. I tried electrical tape, glove, rubber band, and different size tools. Definitely at a stand still here, any help is appreciated ☺️
Is this a good question?
Rep: 7.1k
4
2
2
You can possibly cut the frame to open it up to access the screw and put a new mid frame on it. It sounds like the screen is damaged but don't damage the motherboard. Or you can drill out the screw, which is probably the better option.
Was this answer helpful?
Past 24 Hours: 2
Past 7 Days: 4
Past 30 Days: 6
All Time: 679
