Model A1311 / Mid 2010 / 3.06 & 3.2 GHz Core i3 or 3.6 GHz Core i5 Processor

228 Questions View all

Can display data cable make my screen go blank

My intel iMac Pc was not powering so i opened it up remove the power supply and changed the capacitor this solved the problem for a while later same problem occured fixed it again and coupled it back even with the data display cable tucked in properly the system gives sound on power up but nothing to show on display how do i fix this

Answered! View the answer I have this problem too

Is this a good question?

Score 1
Add a comment

2 Answers

Chosen Solution

To verify that its the display or a display compontent, plug in an external monitor. If you see something, then its the display, if not, its your logic board or your GPU.

Was this answer helpful?

Score 3
Add a comment

I did a hard drive upgrade, and at first, my screen was blank, but would show up on my TV, it turns out the cable's lock is VERY sensitive, and you have to plug it in properly, then be careful with the LCD. For some reason, it does not work when I had the torx screws around the LCD in too tight.

Was this answer helpful?

Score 0
Add a comment

Add your answer

bayoadenuga will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 1,091