Fix Your Stuff Community Store

{A1706 / EMC 3071}—Released in June 2017, this 13" Macbook Pro features Kaby Lake processors up to 3.5 GHz Core i7 with Turbo Boost up to 4.0 GHz.

277 Questions View all

Options

820-00239 logic board - temp sensor orientation.

Would someone be able to tell me the orientation position of U5860 on the 820-00239 logic board.

I can only make out a couple of numbers but not the dot so I will have to go with which way the numbers face.

Thanks.

Answered! View the answer I have this problem too

Is this a good question?

Yes No
Score 1
Add a comment

2 Answers

Filter by:
Most Helpful Newest Oldest
Chosen Solution

Options

@imicrosoldering U5860 is a TI TMP461 sensor. Here is the datasheet for it. With the writing on the sensor up Pin 1 is to the top left. On your board pin 1 is the bottom left pin so the writing would face to the outside (left hand side).

Block Image

Due to the size of the sensor,the direction of the sensor is not visible on the teardown .

Was this answer helpful?

Yes No
Score 1

1 Comment:

Thanks for that. The Mac arrived with paperwork saying “Chip got knocked off” along with the sensor taped to it. It didn’t say all the pads were also missing so I will have to turtle it. I can usually determine which is pad one on the chip if it has two grounds which it has but they must be separate or the chip is faulty. Thanks again Oldturkey.

by

Add a comment

Options

@imicrosoldering - Did you look at the iFixit teardown to see what it shows?

MacBook Pro 13" Touch Bar 2017 Teardown jump down to Steps 3 & 4

Was this answer helpful?

Yes No
Score 0
Add a comment

Add your answer

Chris Stables will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 9

Past 30 Days: 18

All Time: 374