Rep: 47
3
1
Kenmore model 11020902991 stops after agitates. I bypassed lid switch and washer works flawlessly. So is it safe to assume the lid switch is the problem?? I have never been a fixit guy but am willing to try
Is this a good question?
Rep: 685.3k
3.4k
1.1k
2.6k
The lid switch assembly prevents the washer from spinning when the lid is open. If the lid switch assembly fails, the washer will not spin. To determine if the lid switch assembly is defective, use a multimeter to test the lid switch for continuity. If the lid switch does not have continuity, replace it.
Was this answer helpful?
Not sure how to check for continuity. Seems to me if washer works when switch is bypassed it would have to be the switch
continuity means that electricity will flow though it. The most commonly used tool to measure that is a multimeter
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 9
All Time: 544
