After water spillage, mac suddenly shutdown and fan started to rotate on full speed. After 2 days I tried to power on the mac but it didn't wake up only I heared startup sound for about 1 second then it shut down again again.
So I started to power on by using command + shift + P+R, it started but brightness on display is very low. And nothing happens by pressing F1 & F2 key.
Can anybody help me?
Is this a good question?
Rep: 102.6k
10
54
291
Being a liquid damage it involves hardware, thus there’s not much one can do at a distance to help, it will need technical assistance and probably a component level repair or a logic board replacement. Meantime avoid trying to use the Mac and disconnect the battery as soon as possible..the more electricity flows in the machine the worst the damage will be. If you want to try cleaning the board by yourself here’s a guide that will help you take the correct steps:
Was this answer helpful?
Past 24 Hours: 0
Past 7 Days: 0
Past 30 Days: 0
All Time: 264
