Skip to main content

The G4 Quicksilver came in 533MHz, 667MHz, 733MHz, 800MHz, 933MHz, And 1.0GHz speeds.

49 Questions View all

power light goes off when released

when turning g4 on the motherboard lights up,fan comes on but light on front goes off

Answered! View the answer I have this problem too

Is this a good question?

Score -1
Add a comment

1 Answer

Chosen Solution

Unplug the machine and all peripherals. Press and hold the start button for 10 seconds. Replace the 3.6 volt lithium 1/2 AA PRAM battery on the logic board if it's been over 3 years. Plug it back in. With the door open, press the reset button on the logic board with a pencil eraser. Let us know your results or any changes. Pray.

Was this answer helpful?

Score 3
Add a comment

Add your answer

rev frank currier will be eternally grateful.
View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 2

All Time: 1,364